Rézo Building · Paris/France

  • Aluminium sheets 55HX ® · Dimensions 1,350 × 3,500 mm in 5 mm thickness
  • Further processing: Perforating (>50 %), laser cutting, and natural batch anodising
  • Architects: Architectures Anne Démians

Friends Arena · Stockholm/Sweden

  • 55HX ® aluminium 1.8 mm thickness
  • Further processing: Cut-to-size panels naturally anodised to 20 μm
  • Architects: Berg Arkitektkontor AB, Arkitekterna Krook & Tjäder

New Amsterdam / The Netherlands

  • 5754-O aluminium up to 2 mm thickness
  • Further processing: Cut-to-size panels, 25 μ anodised in bronze C31 and C32
  • Architects: Architekten Cie

Audi Show Room · Bratislava / Slovakia

  • 55HX® aluminium coil in 2 mm thickness
  • Further processing: Cutting to size, perforating, flattening, folding several times, partial sawing and finally natural batch anodising
  • Architects: Allmann Sattler Wappner, Munich

Residential Complex · Zug’s Riedpark / Switzerland

  • 55HX® aluminium strips in 1.5 mm thickness
  • Further processing: MONTAFORM® design profiles
  • Architects: Mueller Sigrist and EM2N Mathias Mueller, Daniel Niggli in Zurich

Children’s and Heart Center · Innsbruck / Austria

  • 55HX® aluminium sheet · 2-3 mm thickness Small (2,000 x 1,000 mm) Medium (2,500 x 1,250 mm) Large (3,000-4,000 x 1,500 mm) plus some special lengths
  • Further processing: Anodised
  • Architects: Nickl & Partner Architekten, Munich

International Conference Center · Dalian / China

  • 55HX® aluminium panels and strips in 3 mm thickness
  • Further processing: 10 μ and 20 μ natural anodised
  • • Architects: COOP HIMME

New Museum of Contemporary Art · New York / USA

  • 151EX aluminium in 3 to 6 mm thickness, width up to 1,600 mm
  • Further processing: Mesh structure
  • Architects: Kazuyo Sejima and Ryue Nishizawa

European Cup Arena · Warsaw / Poland

  • EN 5005 H24 aluminium coils in 4 and 5 mm thickness
  • Further processing: Expanding, cutting to panels, red and silver batch anodising
  • Architects: JSK Architekci Sp. z o.o., gmp International GmbH, Schlaich Bergermann and Partners

Addenbrooke Car Park · Cambridge / UK

  • 151 EX aluminium plates, with a length of up to 4,620 mm, a width of 1,250 mm and a thickness of 5 mm
  • Further processing: Cut, twisted, anodised natural and yellow powder coated
  • Architects: Allies and Morrison with Devereux Architects

ENSM · Le Havre / France

  • 55HX ® aluminium strip and coils in 2 mm thickness
  • Further processing: Perforation up to 53 %, anodising in bronze 60 and 85, cut to length and bending
  • Architects: AIA Associés

Selfridges Department Store · Birmingham / UK

  • 151EX cut to discs with a diameter of 800 mm
  • Further processing: Shaping, pressing and turning, polishing and finally anodising
  • Architects: Jan Kaplicks and Amanda Levete

Tianjin Binhai International Airport · Tianjin / China

  • 55HX ® sheets, EN5754 sheets and EN 3005 coils
  • Further processing: Anodised or coil-coated
  • Architects: Kohn Pedersen Fox Architects Netherlands Airport Consultants (Netherlands)

Kanaalzone · Wijnegem / Belgium

  • 55HX® panels of 3 mm thickness
  • Further processing: 20 μ batch anodised in bronze C31
  • Architects: Stéphane Beel